Care and Cleaning

  1.  After extracting the oil, let the machine rest for 5 minutes.

  1.  Pull out the oil extractor head cord and let the machine cool for 30 – 60 minutes.

care_cleaning

  1. Turn the locking clip to the “open” direction to unlock. Hold the oil extractor head with one hand and push the “start” button for 10 second to release the screw.

care_cleaning

  1. The Chaff cap comes off when it is pulled up.

care_cleaning

  1.  To loosen the ring, turn it clockwise as shown in the picture.

care_cleaning

  1. Remove the seed chaff in the ring.

    *Note: the ring is washable.

care_cleaning

  1. Wrap a kitchen towel around a brush and clean the screw barrel thoroughly.

  2. The hopper, oil extractor screw, ring and chaff are the only washable parts for the oil extractor head.

  3. Reassemble the machine in this order. Main unit -> Screw -> Oil Extractor Head.

    Then plug the oil extractor cord to the main unit power socket.

care_cleaning

  1. How to use the cleaning knife

    Clean the lower part of the oil outlet with the cleaning brush and use the cleaning knife to remove the remaining oil residue.

care_cleaning